Used RT1500 | Electric Case Trimmer
*Free Shipping
The RT1500 Electric Case Trimmer is designed to handle
the heaviest trimming jobs, including converting 223 Remington into 300 AAC
Blackout. The RT1500 makes short work out of trimming large quantities of brass.
The RT 1500 trim die is used just like a standard size die. The big difference
is that while you are pushing the case into the die to size it, a 1/4
horsepower electric motor driving a carbide cutter is trimming the case to
length.
Chips are drawn off through a vacuum manifold that clamps to the
outside of the special size/trim die. (Vacuum cleaner and hose not included.)
Outside diameter of manifold is 1.250" where the vacuum hose connects. The
RT1500 is equipped with a quick-disconnect power cord; and it can be used on
any standard reloader, single stage or progressive. See below for caliber
exceptions. Available only in 110 volt / 60 Hz. Case lube must be used to size and trim brass.
In order to trim .300 Blackout or 6.8 SPC you must be
aware of the following:
- You must use the RT1500 trimmer
- You must use the Dillon XL650 Short Trim Die Toolhead #62112 , 1050 Short Trim Die Toolhead
#62219, or RL550 Short Trim Die Toolhead #62231
- To convert .223 Remington /
5.56mm into .300 Blackout you must use the Dillon Carbide .300 Blackout Trim
Die #62140
[ITEMPRICE]